Fusion FX Bar 3 System Menu Fusion FX Bar 3 System Menu
ADDR - DMX Address Setting via control board -
1. Tap the MENU button until “ADDR” is displayed, press ENTER.
2. “X” will now be displayed, “X” represents the displayed address.
Press the UP or DOWN buttons to nd your desired address.
3. Press ENTER to conrm, and then press and hold the MENU button
for at least three seconds to assign.
SLND - This will let you set unit as a master or slave in a
master/slave conguration.
1. Tap the MENU button until “SLND” is displayed, press ENTER.
Either “MAST”, “SL 1” or “SL 2” will be displayed.
2. Tap the UP or DOWN buttons until your desired setting is dis-
played, press ENTER to conm.
NOTE: In a Master/Slave conguration you can make one xture the
Master and then set the next xture to “SL 2”, the xtures will now
have contrast movement to each other.
SHND: SH 1 - SH 19 - Show modes 1 - 19 (Factory pro-
grams). For Show Mode to run properly, make sure Sound Active
On-Board System Menu.
The Fusion FX Bar 3 comes with an easy
to navigate system menu. This next section will detail the functions of
each command in the system menu. Please read the next section
thoroughly!
To access the main menu press the MENU button. Tap the UP or
DOWN buttons until you reach function you wish to change. When you
reach the function you wish to change press the ENTER button. When
a function is selected use the UP or DOWN buttons to change the func-
tion settings. Once your changes are made press the ENTER button,
and then press and hold the MENU button for at least three seconds
to conrm and lock the change into the system memory. If the MENU
button is not pressed and held within eight seconds the xture will
automatically conrm and lock the change into the system memory. To
exit without making any changes press the MENU button.
©American DJ Supply® - www.americandj.com - Fusion FX Bar 3 Instruction Manual Page 7 ©American DJ Supply® - www.americandj.com - Fusion FX Bar 3 Instruction Manual Page 8
Comments to this Manuals